June 26, 2020 at 08:03 #28301
I receive a black screen on connect. This is remote/ different location. This worked just a week ago. Windows 10 suddenly complained that version was not 64 bit compatible so I uninstalled and re-installed. Hardware accel is turned off. The remoter machines are Lunux/Ubuntu headless and a Windows 10 laptop – BOTH have the same exact display issue. Looks like it connects but I receive no video. Is there something that needs to change in the router/gateway to allow return video? My router needed to be swapped out, I fixed the port forward
ThanksJune 30, 2020 at 08:55 #28312
The latest version is what caused the problem. I completely removed/uninstalled the latest version and found a very old version 5.1.62_1 and it runs correctly – something with the new version is not right.
as previously stated, Ubuntu desktop with dongle on video card. Laptop with Windows 10 (upgraded from windows 7) both worked prior to latest version on my Windows 10 desktop (across town) connecting to both machines remotely – now works
Not sure what you need from me to help find a fix.June 30, 2020 at 10:32 #28335fra81Moderator
The latest version is what caused the problem.
Do you mean latest 6.11.2 or any version before that?
If the issue is present with version 6.11.2, would you try to reproduce again and send us the logs for debugging? You can find instructions in https://www.nomachine.com/AR10K00697 (for server side logs) and https://www.nomachine.com/DT10O00163#2 (client side). You can send everything to forum[at]nomachine[dot]com.July 2, 2020 at 07:58 #28370
Sent logs – not much in them. The remote machines will be a little tougher to get the logs.
1. Removed 5.1.62_1
2. Installed 6.11.2_
same behavior as before – black screen
3. saved logs / sent as requested
4. removed 6.11.2 – reinstalled 5.1.62
5. screens display correctly from linux and windows clients (remote boxes)July 2, 2020 at 11:05 #28382BritgirlKeymaster
We received the logs, but there are no logs from the server side. We would need those (from the machine that you are connecting to) to understand what is happening.
Can you tell me what version you were on before you updated to 6.11?July 2, 2020 at 16:13 #28383
Not sure of prior version – but re-created with good connect on 5.1.62, then installed 6.11.2 and duplicated the blank screens – removed the 6.11.2 , installed the 5.1.62 again and I am working correctly. I will be sending logs from Windows and Linux machines
You must be logged in to reply to this topic.