NoMachine inside docker – resource sharing doesn’t work

Forum / NoMachine for Linux / NoMachine inside docker – resource sharing doesn’t work

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #16226
    stempher
    Participant

    Hi

    I’m using NoMachine inside Docker. Doesn’t work sharing – folder, printer, usb. Log file attached.

    #16239
    stempher
    Participant

    Remote: NoMachine – Version 5.3.12 (free version) running on Ubuntu 16.04 inside docker 1.12.6

    Client: 5.3.12 Ubuntu 16.04

    Connecting to the virtual display

    remote machine desktop: i3wm 4.14.1

    Attachments:
    #16251
    Mushroom
    Participant

    Hello stempher

    Thank you for information, we will investigate this issue in our labs.
    There may be some services that don’t work because of Docker limitations.
    For example, USB sharing needs the driver in order to work.

    It would be helpful if you could send us server side logs, which are in:
    /usr/NX/var/log on your server machine.

    Also some useful information are stored in session logs – /usr/NX/var/log/node.
    For example if you don’t have Cups installed, printing will not work and that information would be in those logs. Send to forum[at]nomachine[dot]com.

    #16254
    stempher
    Participant

    Hello

    Cups installed. I set everything according to the instructions https://www.nomachine.com/pdf/How_to_run_NoMachine_server_inside_Docker.pdf

    Ok, i send logs to mail.

     

    One more question. Is possible start of NoMachine in a container without –cap-add=SYS_PTRACE

    #16337
    Mushroom
    Participant

    Hello stempher

    In order to fix compilation error of USB module you should follow instruction in this Article:
    https://www.nomachine.com/AR12J00658

    If this instruction will not work, can you provide us output of make command?

    Some helpful information is in this article (disk sharing):
    https://www.nomachine.com/AR07N00893
    And this (NoMachine in docker):
    https://www.nomachine.com/DT08M00100

    And –cap-add=SYS_PTRACE is needed for normal functioning of nxserver.

Viewing 5 posts - 1 through 5 (of 5 total)

Closed because the user did not provide further feedback. Please notify us if you confirm that it is resolved or open a new topic if you have the same problem.