Noobee questions

Forums / NoMachine for Windows / Noobee questions

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13358
    ag
    Participant

    I have tried to connect but am stuck right from the start  🙁

    The remote machine says use three different nx:// numbers all of which time out.

    The one that ends with :12345  [five digits] gives a ‘forbidden character’ error which i cannot find reference to here. So using the nx number w/o it allows an attempted connection, but again, they time out.

    help please?

    Additional information:

    cannot connect via nx or ssh???

    putting this “host” in:

    nx://11.111.111.11:22222 > gives forbidden character error

    11.111.111.11:22222 > gives forbidden character error

    11.111.111.11 > times out

    #13385
    Britgirl
    Keymaster

    If you want to start from the first pane (see attachment tutorial_3.jpg), you can write nx://11.111.111.11:22222 and click ‘Connect’.

    What happens? Do you connect?

    If, on the other hand, you are using the connection wizard to create your connection (see attachment tutorial_13.jpg) you must write the hostname and then in the box next to it, you write the port number eg: Host is 11.111.111.11, so you enter 11.111.111.11. Port is 22222, so you enter 22222.

    What happens? Do you connect?

    These images are available in the tutorial here: https://www.nomachine.com/getting-started-with-nomachine#internet

Viewing 2 posts - 1 through 2 (of 2 total)

Closed because the user did not provide further feedback. Please notify us if you confirm that it is resolved or open a new topic if you have the same problem.