Trouble installing NoMachine on Jetson Nano

Forums / NoMachine for ARM / Trouble installing NoMachine on Jetson Nano

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #30507
    AvatarArved
    Participant

    Hello, I am trying to install ‘nomachine_6.12.3_5_armv7hl.tar.gz’  on my jetson nano per https://www.nomachine.com/download/download&id=111&s=ARM and am getting the following errors:

    arved@arved-jetson:/$ sudo /usr/NX/nxserver –install

    NX> 700 Starting install at: lun nov 23 18:38:02 2020.

    NX> 700 Installing: nxclient version: 6.12.3.

    NX> 700 Using installation profile: Ubuntu.

    NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.

    NX> 700 Compiling the USB module.

    NX> 700 Installing: nxplayer version: 6.12.3.

    NX> 700 Using installation profile: Ubuntu.

    NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.

    NX> 700 To connect the remote printer to the local desktop,

    NX> 700 the user account must be a member of the CUPS System Group..

    NX> 700 Player install completed with warnings.

    NX> 700 Please review the install log for details.

    NX> 700 Installing: nxnode version: 6.12.3.

    NX> 700 Using installation profile: Ubuntu.

    NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.

    NX> 700 Creating configuration in: /usr/NX/etc/node.cfg.

    NX> 700 ERROR: Cannot validate license file.

    NX> 700 Displaying file: /usr/NX/share/documents/node/cups-info

     

    CUPS Printing Backend

     

    The  NoMachine Node  setup procedure could not detect your CUPS installation: either  CUPS  is not installed on  your

    system or it was installed in a non-standard path. CUPS is needed  in order to  enable  printing  support  in your NX

    system.

    Please note that you can enable  printing support for your NX system at any time; to do this make sure  that you have

    CUPS installed then run:

     

    /usr/NX/scripts/setup/nxnode –printingsetup <pathname>

     

    to specify the location of the CUPS root path.

     

    NX> 700 Node install completed with warnings.

    NX> 700 Please review the install log for details.

    NX> 700 Installing: nxserver version: 6.12.3.

    NX> 700 Using installation profile: Ubuntu.

    NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.

    NX> 700 Creating configuration in: /usr/NX/etc/server.cfg.

    NX> 700 ERROR: Cannot validate license file.

    NX> 700 Cannot validate node license file.

    NX> 700 Failed to run ‘/usr/NX/bin/nxkeygen’.

    /bin/sed: can’t read /var/NX/nx/.ssh/authorized_keys: No such file or directory

    /bin/sed: can’t read /var/NX/nx/.ssh/authorized_keys: No such file or directory

    /bin/sed: can’t read /var/NX/nx/.ssh/authorized_keys2: No such file or directory

    /bin/sed: can’t read /var/NX/nx/.ssh/authorized_keys2: No such file or directory

    NX> 700 Server install completed with warnings.

    NX> 700 Please review the install log for details.

    NX> 700 Install completed with errors at: lun nov 23 18:38:29 2020.

    NX> 700 NoMachine was configured to run the following services:

    NX> 700 NX service on port: 4000

    Who can help?

     

    Arved

    #30539
    Avatarkroy
    Contributor

    It’s look that you have different architecture than the one you have installed. You can check architecture with command:

    uname -a

    if it’s v8 – uninstall current version

    sudo dpkg --purge nomachine && sudo rm -rf /usr/NX

    and install correct package.

    https://www.nomachine.com/AR02R01074

Viewing 2 posts - 1 through 2 (of 2 total)

This topic was marked as solved, you can't post.