StefanS

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • StefanS
    Participant

    I will try to use different video driver/driver version. I will try this on the weekend. Thanks

    StefanS
    Participant

    output of xrandr -q in both states (with and without monitor)

    without monitor

    
    Screen 0: minimum 640 x 480, current 800 x 600, maximum 16384 x 16384
    nxoutput0 connected primary 800x600+0+0 203mm x 152mm
       800x600       60.00*+
       640x480       60.00  
       800x480       60.00  
       1024x600      60.00  
       1024x768      60.00  
       1152x864      60.00  
       1280x720      60.00  
       1280x800      60.00  
       1280x1024     60.00  
       1360x768      60.00  
       1366x768      60.00  
       1440x900      60.00  
       1600x900      60.00  
       1600x1200     60.00  
       1680x1050     60.00  
       1920x1080     60.00  
       1920x1200     60.00  
    

    with monitor

    
    Screen 0: minimum 8 x 8, current 2560 x 1080, maximum 32767 x 32767
    DVI-D-0 connected primary 2560x1080+0+0 (normal left inverted right x axis y axis) 673mm x 284mm
       2560x1080     59.98*+
       1920x1080     60.00  
       1680x1050     59.95  
       1440x900      59.89  
       1280x1024     75.02    60.02  
       1280x960      60.00  
       1280x800      59.81  
       1280x720      60.00  
       1152x864      75.00  
       1024x768      75.03    70.07    60.00  
       800x600       75.00    72.19    60.32    56.25  
       640x480       75.00    59.94  
    HDMI-0 disconnected (normal left inverted right x axis y axis)
    HDMI-1 disconnected (normal left inverted right x axis y axis)
    DP-0 disconnected (normal left inverted right x axis y axis)
    DP-1 disconnected (normal left inverted right x axis y axis)
    DP-2 disconnected (normal left inverted right x axis y axis)
    DP-3 disconnected (normal left inverted right x axis y axis)
    
    StefanS
    Participant

    I created a new config with nvidia-xconfig but this did not help.

    However, I found out that the problem disappears when I disconnect the monitor (DVI) from the remote System. This is however a very sub optimal solution for me because I plan to use the remote system in both ways (not simultaneously) , so directly accessing the the remote system with the connected monitor  and remotely through NoMachine.

    Do I need NoMachine Workstation here to use virtual desktops/sessions to get this to work?

    Thanks btw for your help. Verymuch appreciated.

     

    StefanS
    Participant

    I set the option as given but problem still exist.

    I figured out the problem only exist if there is no to very small graphical interaction. If for instant Firefox  is running with a
    YouTube video the problem disappears. The video must be the active tab and Firefox must not be minimized.

    This also works if I open a new konsole window and execute for i in {1..999999}; do echo $i; sleep 0.1 ;done This produces
    output on the screen and apparently enough interaction to redraw the screen. This also explains why it worked with the running
    xinput running.

    Is it possible that my nvidia graphics cards is not set up probably?

    
    x@x:~$ nvidia-smi
    Thu Apr 16 21:32:47 2020
    +-----------------------------------------------------------------------------+
    | NVIDIA-SMI 440.82       Driver Version: 440.82       CUDA Version: 10.2     |
    |-------------------------------+----------------------+----------------------+
    | GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
    | Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
    |===============================+======================+======================|
    |   0  GeForce GTX 1080    Off  | 00000000:01:00.0  On |                  N/A |
    |  0%   52C    P5    15W / 198W |    268MiB /  8116MiB |     15%      Default |
    +-------------------------------+----------------------+----------------------+
    
    +-----------------------------------------------------------------------------+
    | Processes:                                                       GPU Memory |
    |  GPU       PID   Type   Process name                             Usage      |
    |=============================================================================|
    |    0      1972      G   /usr/lib/xorg/Xorg                           173MiB |
    |    0      6292      G   kwin_x11                                      24MiB |
    |    0      6299      G   /usr/bin/krunner                               1MiB |
    |    0      6301      G   /usr/bin/plasmashell                          63MiB |
    +-----------------------------------------------------------------------------+
    
    StefanS
    Participant

    One additional input I have that my help.

    My remote machine has a display attach so I can watch what the remote user is doing on the system.
    If I enter something on the client side the input will show up immediately on the display attached to
    the remote machine but on the client I see the problem described above.  So it looks like the key events are transferred correctly from the client to the remote system but the other way around has the problem.

    Flow:
    Input in Konsole Application and the corresponding effect on the screen
    Event (Input Char)       client(noMachine Window)            display directly attached to remote host

    H                                                    H                                                            H
    e                                                     He                                                          He
    l                                                      He                                                          Hel
    l                                                      Hell  (<- both ‘l’ at the same time)         Hell
    o                                                     Hell                                                        Hello
    (space)                                           Hello                                                       Hello(space)

    The missing characters will also appear if I minimize and maximize the Konsole application,
    move the Konsole window around or changing focus between windows.

     

    StefanS
    Participant

    > Does xinput produce any output?

    Yes, the normal output including mouse and key Events. See xinput.log for a small output of the command.

    > Could you send the server session log located at /usr/NX/var/log/node/C-…?

    See Attachments

    > Is the problem reproduced with non-KDE applications (xterm, for example)?

    Yes the problem is reproduced with xterm. Other non Terminal emulators such as the text editor Kate works with some key delay but
    all keys appear on there own.

    Attachments:
Viewing 6 posts - 1 through 6 (of 6 total)