dbiles

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 5, 2020 at 08:59 in reply to: File transfer suddenly disabled #29782
    dbiles
    Participant

    I found the problem: for some reason Catalina did not have full disk access enabled for nxnode.  Once I did enable it file transfer is working again.  thanks for your help! 🙂

    September 28, 2020 at 08:57 in reply to: File transfer suddenly disabled #29645
    dbiles
    Participant

    Drag & drop doesn’t work either: no transfer is initiated.  “Show the menu panel” does open the client conf menu.  I think this is a problem with Catalina, similar if not the same as referenced here: https://www.nomachine.com/TR10Q09429  I think this because using Ubuntu 18.04 in Virtual Box the transfers work perfectly, so the problem doesn’t seem to be in NoMachine.  I’ve granted NoMachine full disk access, and I haven’t changed anything in the client firewall.  The transfers just stopped working.  I cleared the logs on both machines and re-initiated a transfer…here are those logs.

     

    Attachments:
    1. client_log.zip
    2. server_log.zip
    September 23, 2020 at 08:43 in reply to: File transfer suddenly disabled #29576
    dbiles
    Participant

    No that doesn’t make any difference.  the pull-down file transfer menu is there and functions normally.  It’s just that no file selection window ever appears.  What’s weird is it was working fine…

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)