ebiscaia

Forum Replies Created

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • in reply to: Server does not start #33092
    ebiscaia
    Participant

    Hi,

    I’m glad to say it worked. Server started already active and I managed to connect to it remotely.

    Thank you

    in reply to: Server does not start #32950
    ebiscaia
    Participant

    Hi Carin,

    I’d love to test it. Please, let me know when it’s ready.

     

    in reply to: Server does not start #32668
    ebiscaia
    Participant

    Hi,

    Seems like there is a permission issue that makes some files not being compressed if they are in the folder. Here is a new set of files.

    Attachments:
    in reply to: Server does not start #32653
    ebiscaia
    Participant

    Hi,

    I used tonight the program you sent me. No changes. Here are the logs, in debug mode already.

    Thanks,

    Eduardo

    Attachments:
    in reply to: Server does not start #32549
    ebiscaia
    Participant

    Of course. I’d have no objection to that.

    Thanks,

    Eduardo

    in reply to: Server does not start #32338
    ebiscaia
    Participant

    Hi,

    Here are today’s logs.

    Thanks

    Attachments:
    in reply to: Server does not start #32067
    ebiscaia
    Participant

    Hi,

    After giving a break to deal with other stuff, I tried to check where the problem could be. Still didn’t make a big change but it seems like I also had a permission issue. After giving my user full access to the license files the  dot where it shows the server status changed from gray to red. I can’t connect, nonetheless.

    Just uploading the log files after the change.

    Thanks,

    Eduardo

    Attachments:
    in reply to: Server does not start #31727
    ebiscaia
    Participant

    Hi,

    Sorry for the late reply. I deleted the folders and also some registry info (couldn’t delete all of them because I was not allowed to for some of them even with admin permissions), reset the computer, installed the program, reset the computer and tried to run NoMachine. It did not work. Redid it and decided to install an old version. Nothing. Then, I tried to change the port to 4001 in this old version and try to make it run. As the lights turned green I thought it was running. Therefore, I tried to log in with another computer. Nothing. I saved some logs to see if that would help.

    Thanks

    Attachments:
    in reply to: Server does not start #31729
    ebiscaia
    Participant

    Just did ./nxserver.exe –restart and received the same message about the subscription which makes me wonder if it is a case of a registry input. Will try another fresh install during the day.

    in reply to: Server does not start #31620
    ebiscaia
    Participant

    Hi,

    Here are the outputs of the commands:

    c:\Program Files (x86)\NoMachine\bin>nxserver –subscription

    NX> 622 You appear to run an NoMachine free version. Please visit

    NX> 622 the NoMachine Web site at http://www.nomachine.com/

    NX> 622 if you want to use NoMachine for business purposes.

    c:\Program Files (x86)\NoMachine\bin>nxserver –version

    NoMachine – Version 7.0.211

     

    I also attached the server.lic file and node.lic (just in case).

    Thank you,

     

    Eduardo

    in reply to: Server does not start #31512
    ebiscaia
    Participant

    Hi,

    Thanks for helping me. Let’s see if I can give you more data:

    Are you sure that NoMachine nxserver is not running? I see some nxserver process in process explorer.

    That process lasts as long as nxserver is trying to run. Just checked it here with cmd and the proccess stops being shown when the cmd output is displayed on the screen. But there is the nxservice64 –servicemode that is always running even after all other nx services are off and I can’t kill it. Not sure if there is any relation, though.

    Please paste here screenshot with output for command from point 3 and point 4.

    C:\Program Files (x86)\NoMachine\bin>nxserver –status

    NX> 111 New connections to NoMachine server are enabled.

    NX> 162 Disabled service: nxserver.

    NX> 162 Disabled service: nxnode.

    NX> 162 Disabled service: nxd.

    C:\Program Files (x86)\NoMachine\bin>nxserver –restart

    NX> 162 Service: nxserver already disabled.

    NX> 162 Service: nxnode already disabled.

    NX> 162 Service: nxd already disabled.

    NX> 162 Disabled service: nxserver.

    NX> 162 Disabled service: nxnode.

    NX> 162 Disabled service: nxd.

    This time with the program open

    C:\Program Files (x86)\NoMachine\bin>nxserver –restart

    NX> 162 Service: nxserver already disabled.

    NX> 162 Service: nxnode already disabled.

    NX> 162 Service: nxd already disabled.

    NX> 162 Disabled service: nxserver.

    NX> 162 Disabled service: nxnode.

    NX> 162 Disabled service: nxd.

    C:\Program Files (x86)\NoMachine\bin>nxserver –startup

    NX> 162 Disabled service: nxserver.

    NX> 162 Disabled service: nxnode.

    NX> 162 Disabled service: nxd.

    Also I do not see logs from nxserver or even nxinstall, could you check those both location for them:

    I reran the logs and included the files from both folders. Hope that helps.

    Best regards,

    Eduardo

    in reply to: Server does not start #31466
    ebiscaia
    Participant

    Update:

    Removed the chocolatey version of the program and installed the one from the website

    Tried to follow these two:

    https://www.nomachine.com/AR07D00404

    https://www.nomachine.com/AR11O00942

    From the prompt:

    PS C:\Program Files (x86)\NoMachine\bin> ./nxserver –activate “C:\Program Files (x86)\NoMachine\etc\node.lic”

    NX> 732 License C:\Program Files (x86)\NoMachine\etc\node.lic is already active.

    PS C:\Program Files (x86)\NoMachine\bin> ./nxserver –activate “C:\Program Files (x86)\NoMachine\etc\server.lic”

    NX> 732 License C:\Program Files (x86)\NoMachine\etc\server.lic is already active.

    Tried to get the .lic files from another machine I installed the program just with this purpose. Still nothing.

     

    Thanks,

     

    Eduardo

     

     

    in reply to: Server does not start #31363
    ebiscaia
    Participant

    Hi,

    About you questions:

    “So everything worked correctly before using Dynu DDNS? Or something else also changed? For example: new version of nomachine was installed?”

    Yep. Actually, before that I was also able to ssh my computer from the internal network using the public IP with NAT. So I could:

    ssh eddie@my_private_ip or

    ssh eddie@my_public_ip -p port_number, without leaving my private network and it work in both cases. Now if I want to connect in the second case or use my hostname, I need to be out of my private network (iPhone Personal Hotspot).

    “”Also, when I try to run nxserver using cmd, another process starts (nxserver.bin) and disappears.”

    I may not be expressed well here, when I double-click nxserver.exe, I see this nxserver.bin showing up and disappearing with the .exe process in the process explorer. Also a prompt screen shows up but the messages just flash on the screen before the window closes. I recorded the screen and the message is (file included):

    No valid subscription found. Please visit the NoMachine web site at nomachine.com to acquire a valid subscription. The NoMachine server cannot perform the requested action. Bye.

    “Could you try gather logs with steps from here?

    https://www.nomachine.com/DT10O00162#1

    It must be done in cmd as administrator user.”

    File included.

    Thanks,

    Eduardo

Viewing 13 posts - 1 through 13 (of 13 total)