Forum Replies Created
April 10, 2017 at 14:03 in reply to: Blank screen when connect – no top corner flap for settings even #14325
Hi was wondering if theres any break through with this issue? Thank you.March 27, 2017 at 14:52 in reply to: Blank screen when connect – no top corner flap for settings even #14162
Did a clean install of ‘nomachine_5.2.11_1_amd64.deb’, after removing /usr/NX and letting the install recreate everything.
Tried to connect from my Windows client, same black screen issue (no corner flap), eventually kicks out with “Error 138” some connection to server lost thing.
Tried from localhost as requested, this time blank white screen (no corner flap), kicks out with “Error 110” same connection to server lost thing.
The node directory and nxd.log are zipped and attached.
Attachments:March 27, 2017 at 10:47 in reply to: Blank screen when connect – no top corner flap for settings even #14158
Ah ok, sorry I was confused because my initial post went through immediately. Thanks!
I have uninstalled and reinstalled versions 4.x and 5.1 of NoMachine and still get the black screen without the flap. Reinstalled 5.2 and still the same issue. As a temporary fix until someone has a solution to this, I’ve installed [another product]. Its gets the job done and is functional but I still prefer NoMachine, so hope someone can figure out this issue.
Attached logs from the client side.
Attachments:March 27, 2017 at 07:39 in reply to: Blank screen when connect – no top corner flap for settings even #14145
I replied but my post is being held for moderation?March 27, 2017 at 07:38 in reply to: Blank screen when connect – no top corner flap for settings even #14143
Hi sorry for the late reply, didn’t get any emails notifying me there was a response.
Nothing different on this machine. In fact, I had NoMachine running fine on this same hardware previously. All I did was replace the hard drive (old hard drive was running ubuntu 14.05) and install the latest Ubuntu and patch it will all the recommended app and security patches, just like all my other machines. All the other machines run nomachine fine, its just this one machine that exhibits this issue. Iptables currently allows all traffic, no restrictions (until this issue is solved, this machine is not running anything other than whats supposed to run after a clean install).
Also, I’ve tried putting back the old hard drive (running ubuntu 14.05) and running NoMachine and it connects just fine. Just this new install.
Anyway for the output requested:
# cat /etc/hosts
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
eno1 Link encap:Ethernet HWaddr A4:02:B9:25:ef:d0
inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: ffe80::5136:e219:1775:7fac/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2086320 errors:0 dropped:0 overruns:0 frame:0
TX packets:886848 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:921274076 (921.2 MB) TX bytes:384847275 (384.8 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:3255346 errors:0 dropped:0 overruns:0 frame:0
TX packets:3255346 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:1389571225 (1.3 GB) TX bytes:1389571225 (1.3 GB)
# ping -c 3 localhost
PING localhost (127.0.0.1) 56(84) bytes of data.
64 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.032 ms
64 bytes from localhost (127.0.0.1): icmp_seq=2 ttl=64 time=0.048 ms
64 bytes from localhost (127.0.0.1): icmp_seq=3 ttl=64 time=0.062 ms
— localhost ping statistics —
3 packets transmitted, 3 received, 0% packet loss, time 1998ms
rtt min/avg/max/mdev = 0.032/0.047/0.062/0.013 ms
# uname -a
Linux pan01 4.4.0-67-generic #88-Ubuntu SMP Wed Mar 8 16:34:45 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux