Forum Replies Created
-
Posts
-
I didn’t change anything, but as of this morning I’m able to get into my machine and no longer getting any errors.
It’s a miracle. On the initial login I still get the flickering and it looks like it is going to just freeze and not load again, but I can now access my machine. Thank you very much for your patience and helping me.
/usr/NX/var/log/node/ is 2.5GB and nxserver.log is 1.3GB I will run the command you listed for the nxserver.log, but what should I do about the directory?
I went through the commands to get the log files, but when I ran the command ‘sudo tar cvfz NoMachine-log.tar.gz /usr/NX/var/log’ it ran for nearly 30 min before I stopped it. Are there any other steps I should do before running that?
I will get the logs collected and sent. Here is the output of ‘ps awwxo uid,ppid,pid,sid,etime,comm,args’
In looking at the Xorg logs, the newest one I have is from Oct 5. I ran the command below and got the results listed to look for issues.
cat /var/log/Xorg.0.log | grep -E ‘(EE)|(WW)’
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 193.172] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 193.244] (WW) Warning, couldn’t open module fbdev
[ 193.244] (EE) Failed to load module “fbdev” (module does not exist, 0)
[ 193.245] (WW) Warning, couldn’t open module vesa
[ 193.245] (EE) Failed to load module “vesa” (module does not exist, 0)
[ 193.898] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
The nxerror log is very long, so I took what looks like the last 2 entries from it.
Info: Handler started with pid 8118 on Tue Oct 24 16:28:53 2017.
Info: Handling connection from xxx.xxx.xxx.xxx port 50466 on Tue Oct 24 16:28:53 2017.
Info: Connection from xxx.xxx.xxx.xxx port 50466 closed on Tue Oct 24 16:29:01 2017.
Info: Handler with pid 8118 terminated on Tue Oct 24 16:29:01 2017.
kill: sending signal to 20617 failed: No such process
Usage: nxnode …
this command is intended to be used only by NX Server
or NX Workstation.
kill: sending signal to 32108 failed: No such process
kill: sending signal to 810 failed: No such process
kill: sending signal to 9474 failed: No such process
Usage: nxnode …
this command is intended to be used only by NX Server
or NX Workstation.
kill: sending signal to 14482 failed: No such process
kill: sending signal to 14487 failed: No such process
kill: sending signal to 21566 failed: No such process
kill: sending signal to 7688 failed: No such process
kill: sending signal to 22835 failed: No such process
kill: sending signal to 23711 failed: No such process
kill: sending signal to 23738 failed: No such process
kill: sending signal to 23780 failed: No such process
kill: sending signal to 28713 failed: No such process
22550 22550 06:01:26 361.446 HostWmRunning: WARNING! Giving up after 500 Ms.
Usage: nxnode …
this command is intended to be used only by NX Server
or NX Workstation.
Usage: nxnode …
this command is intended to be used only by NX Server
or NX Workstation.
Info: Handler started with pid 8887 on Thu Oct 26 11:49:18 2017.
Info: Handling connection from xxx.xxx.xxx.xxx port 34850 on Thu Oct 26 11:49:18 2017.
Info: Connection from xxx.xxx.xxx.xxx port 34850 closed on Thu Oct 26 11:49:25 2017.
Info: Handler with pid 8887 terminated on Thu Oct 26 11:49:25 2017.
Thank you.
Sorry about that. Here is the output of ‘ps -ef | grep -i -e wayland -e xorg’
gdm 1511 1465 0 14:26 tty1 00:00:00 /usr/libexec/Xorg vt1 -displayfd 3 -auth /run/user/42/gdm/Xauthority -nolisten tcp -background none -noreset -keeptty -verbose 3
me 3209 3085 0 14:35 pts/0 00:00:00 grep –color=auto -i -e wayland -e xorg
And the output of ‘ps -ef | grep X’
nx 1168 1 0 14:26 ? 00:00:01 /usr/NX/bin/nxserver.bin –daemon
gdm 1511 1465 0 14:26 tty1 00:00:00 /usr/libexec/Xorg vt1 -displayfd 3 -auth /run/user/42/gdm/Xauthority -nolisten tcp -background none -noreset -keeptty -verbose 3
gdm 2710 1168 0 14:27 ? 00:00:00 /usr/NX/bin/nxexec –node –user gdm –priority realtime –mode 0 –pid 21
nx 2711 1168 0 14:27 ? 00:00:00 /usr/NX/bin/nxd
gdm 2724 2710 0 14:27 ? 00:00:00 /usr/NX/bin/nxnode.bin
me 3273 3085 0 14:36 pts/0 00:00:00 grep –color=auto X
When viewing ‘~/.xsession-errors’ I get the message below.
(process:2320): WARNING **: Could not make bus activated clients aware of XDG_CURRENT_DESKTOP=GNOME environment variable: Could not connect: Connection refused
For the ‘/var/log/Xorg.*.log’ I have 4 different ones, is there a specific on I should look at
/var/log/Xorg.0.log /var/log/Xorg.1.log /var/log/Xorg.2.log /var/log/Xorg.9.log
Thank you.
Sorry for the delay in my response. After logging in locally and selecting the gnome-xorg option, after logging in with NoMachine I get a message of “No available sessions on this server”.
Output of “ps -ef | grep -i E ‘wayland|xorg”
grep: ‘wayland: No such file or directory
bash: xorg’: command not found…
After disabling Wayland and rebooting, I get the connection and get to the login screen on the remote computer. When I try to log in, the screen starts flickering for a bit, then the connection drops and I get the following.
The connection with the server was lost.
Error is 5: Input/output error.
In case it helps, I also get the following when restarting the nxserver.
sudo /usr/NX/bin/nxserver –restart
NX> 162 Disabled service: nxserver.
NX> 162 Disabled service: nxnode.
NX> 162 Disabled service: nxd.
NX> 161 Enabled service: nxserver.
NX> 162 WARNING: Cannot find X servers running on this machine.
NX> 162 WARNING: A new virtual display will be created on demand.
NX> 161 Enabled service: nxd.
The desktop environment is Gnome.
When connecting I initially get this message – “Cannot detect any display running. Do you want NoMachine to create a new display and proceed to connect to the desktop?” I click on “Yes” and after that the screen shows the connecting message for a while, then goes to the error message
Below is the command and output requested.
ps -ef | grep -i E ‘wayland|xorg’
grep: wayland|xorg: No such file or directory