######################################################################

#                                                                    #

#  Copyright (c) 2001, 2020 NoMachine, http://www.nomachine.com.     #

#                                                                    #

#  All rights reserved.                                              #

#                                                                    #

######################################################################




#

# Some configuration keys are used to set specific limits, such as the

# maximum size for the session log. To remove a limitation, set the

# corresponding key to value '0' or 'Unlimited'.




#

# Configuration file format version.

#

ConfigFileVersion 4.0




#

# Specify hostname for the NoMachine node.

#

#NodeName localhost.localdomain




#

# Set log level. Node logs all events that are <= to the level set and

# according to the following convention:

#

# KERN_ERR 3: Error condition.

# KERN_INFO 6: Informational.

# KERN_DEBUG 7: Debug messages.

#

# The suggested values are:

#

# 6: Default value. Only relevant events are logged.

#

# 7: Set the log level to debug.

#

#SessionLogLevel 6

SessionLogLevel 7




#

# Specify path and name of the command to start a new virtual desktop,

# by default the X session set on the system.

#

DefaultDesktopCommand "/etc/X11/Xsession gnome-session"




#

# Provide a comma-separated list of session types supported on this

# node host.

#

AvailableSessionTypes unix-remote,unix-console,unix-default,unix-application,physical-desktop,shadow,unix-xsession-default,unix-gnome,unix-xdm




#

# Set the maximum size, expressed in bytes, allowed for the session

# log. Node terminates the session when this limit is exceeded.

#

#SessionLogLimit 0




#

# Enable or disable the automatic clean-up of session directories at

# the time sessions are terminated.

#

# 1: Enabled. This is the default value.

#

# 0: Disabled. Directories are prefixed by 'T-' and left

#    for further reference.

#

#SessionLogClean 1

SessionLogClean 0




#

# Enable or disable node to log the X clients standard error.

#

# 1: Enabled. Stderr of X clients is redirected to 'clients'

#    file in the session directory.

#

# 0: Disabled. Stderr of X clients is redirected to /dev/null.

#

#ClientLog 1




#

# Set the maximum size, expressed in bytes, allowed for the X clients

# log. Node terminates the session when this limit is exceeded.

#

#ClientLogLimit 0




#

# Set the maximum amount of data, in bytes, that can be copied from

# the session to the client. The default value is 0, i.e. unlimited.

#

#ClipboardBufferLimit 0




#

# Specify for how long the node has to wait for a reply from NoMachine

# server before considering that the connection with the server has

# been lost. Default value, 120 seconds, lets node wait for 2 minutes.

# Set this value to 0 to disable timeout on the node.

#

#NodeConnectionTimeout 120




#

# Enable or disable disk sharing:

#

# client: Filesystem on the client can be connected on server side and

#         accessed from the session.

#

# server: Filesystem on the server can be connected on the end-user's

#         machine and accessed through the whole life of the session.

#

# both:   Client and server filesystem can be connected on remote and

#         locale respectively.

#

# none:   Neither client or server filesystem can be connected.

#

#EnableDiskSharing both




#

# Specify path of base directory where the node has to mount disks

# accessible only by the user who connected them. Base directory is

# "$(DESKTOP)" by default. $(HOME) and $(USER) are also accepted values

# and can be concatenated to specify path to a directory, for example

# "$(HOME)/Shares". Target directory must exist on the system.

#

#DiskSharingPrivateBasePath "$(DESKTOP)"




#

# Specify path to base directory where the node has to mount user's

# disks which are accessible to users running a session on that server.

# Base directory is "$(PUBLIC)" by default. $(PUBLIC) is /Volumes on Mac

# OS X, /media on Linux, C:\Users\Public on Windows Vista/7/8 and

# %ALLUSERSPROFILE% on XP. $(USER) is an accepted value and can be

# concatenated to specify path to a directory, for example "/tmp/$(USER)".

# Target directory must exist on the system.

#

#DiskSharingPublicBasePath "$(PUBLIC)"




#

# Specify which disks are available to be connected in the session.

# Default value is 'all'. Alternatively, specify path to the disk or

# directory in a list of comma-separated values. $(HOME) and $(USER)

# are accepted values. For example "$(HOME),/Volumes/TimeMachine".

#

#DiskSharingList all




#

# Enable or disable printer sharing

#

# client: Printers on the client can be connected on server side and

#         made available within the session.

#

# server: Printers on the server can be connected on the end-user's

#         machine.

#

# both:   Client and server printers can be connected on remote and

#         locale respectively.

#

# none:   Neither client or server printers can be connected.

#

#EnablePrinterSharing both




#

# Enable or disable usb sharing:

#

# client: USB devices on the client can be forwarded on server side and

#         made available within the session

#

# server: USB devices on the server can be connected on the end-user's

#         machine.

#

# both:   Client and server USB devices can be connected on remote and

#         locale respectively.

#

# none:   Neither client or server USB devices can be connected.

#

#EnableUSBSharing both




#

# Enable or disable network services sharing:

#

# client: Network servers on client side can be added and made available

#         within the session.

#

# server: Network server on the server side can be added and made

#         available on the end-user's machine.

#

# both:   Network servers from client and server side can be connected

#         on remote and locale respectively.

#

# none:   Neither client or server side network servers can be

#         connected.

#

#EnableNetworkSharing both




#

# Enable or disable connecting a smartcard reader:

#

# 1: Enabled. The smartcard reader plugged on client side can be

#             forwarded to server side.

#

# 0: Disabled. The smartcard reader cannot be forwarded.

#

EnableSmartcardSharing 1




#

# Enable or disable file transfer:

#

# client: Files can be transferred from client machine to the

#         server.

#

# server: Files can be sent from the server to users.

#

# both:   Client and server files can be transferred on remote and

#         locale respectively.

#

# none:   Neither client or server files can be transferred.

#

#EnableFileTransfer both




#

# Specify which audio interface should be used to provide sound in

# sessions. Key values depend on the hosting operating system and can

# be 'pulseaudio', 'alsa' or 'disabled' on Linux, and 'nxaudio' or

# 'disabled' on Windows and Mac OS X.

#

AudioInterface pulseaudio




#

# Specify path and name of the command to start PulseAudio server.

#

CommandStartPulseAudio "/usr/bin/pulseaudio --high-priority=no"




#

# Enable or disable CUPS support. This doesn't apply to Windows plat-

# forms. This key is obsolete and used only for retro compatibility.

#

# 1: Enabled. Enable CUPS support.

#

# 0: Disabled. Disable CUPS support.

#

EnableCUPSSupport 1




#

# Specify the path of the directory holding CUPS binaries (e.g. the

# 'lpoptions' program). This key is obsolete and used only for retro

# compatibility.

#

CUPSBinPath /usr/bin




#

# Specify the path of the directory holding CUPS programs and reserved

# for administrative purposes (e.g. 'cupsd' or 'lpadmin'). This key is

# obsolete and used only for retro compatibility.

#

CUPSSbinPath /usr/sbin




#

# Specify the path of directory holding the CUPS backend. This key is

# obsolete and used only for retro compatibility.

#

CUPSBackendPath /usr/lib/cups/backend




#

# Specify path of base directory where the node has to mount shares

# exported by the user. Default value is $(HOME)/MyShares. This key

# is obsolete and used only for retro compatibility.

#

#ShareBasePath $(HOME)/MyShares




#

# Allow node to use the CIFS (SMB) file-sharing protocol to attach the

# filesystem to the target directory. This key is obsolete and used

# only for retro compatibility.

#

# 1: Enabled. Node uses smbfs to mount and unmount client shares.

#

# 0: Disabled. Node forbids any attempt to mount shares via smbfs.

#

EnableSMBFSSupport 0




#

# Specify path and name of the command to start 'GNOME'. This doesn't

# apply to Windows and Mac OS X platforms.

#

CommandStartGnome "/etc/X11/Xsession gnome-session"




#

# Specify path and name of the command to start 'KDE'. This doesn't

# apply to Windows and Mac OS X platforms.

#

#CommandStartKDE ""




#

# Specify path and name of the command to start 'CDE'. This applies to

# Solaris SPARC platforms only.

#

#CommandStartCDE cdwm




#

# Specify path and name of the command to start the RFB Client. If the

# Server supports VNC sessions, set this key to "vncviewer -fullscreen"

# to use the vncviewer client.

#

#CommandStartRFB ""




#

# Specify path and name of the command to start the RDP Client. If the

# Server supports RDP sessions, set this key to "rdesktop -f" to use

# the rdesktop client.

#

#CommandStartRDP ""




#

# Specify the domain of the Windows Terminal Server.

#

#DefaultRDPDomain ""




#

# Specify path and name of the command 'fuser' to identify processes

# using files or sockets.

#

CommandFuser /bin/fuser




#

# Specify path and name of the command 'lsof' to list open files. This

# doesn't apply to Windows and Mac OS X platforms.

#

CommandLsof /usr/bin/lsof




#

# Specify path and name of the client program to be run by the node,

# for example for issuing dialog boxes and messages, instead of the

# default nxclient program.

#

#CommandClient /usr/NX/bin/nxclient




#

# Specify path and name of the command 'xauth' to edit and display

# the authorization information used when connecting to the X server.

#

#CommandXauth /usr/NX/bin/nxauth




#

# Specify path and name of the command 'xdpyinfo' for displaying info-

# rmation about an X server.

#

CommandXdpyInfo /usr/bin/xdpyinfo




#

# Specify path and name of the command 'xmodmap' to edit and display

# the keyboard modifier map and keymap table.

#

CommandXmodmap /usr/bin/xmodmap




#

# Enable or disable use of 'xkbcomp' command:

#

# 1: Enabled. Use 'xkbcomp' command.

#

# 0: Disabled.

#

#EnableCommandXkbComp 1




#

# Specify path and name of the command 'xkbcomp' to compile XKB key-

# board description.

#

CommandXkbComp /usr/bin/xkbcomp




#

# Specify location and file name of the keymap file used by 'xkbcomp'.

#

#XkbCompKeymapFile /etc/X11/xkb/keymap/xfree86




#

# Enable or disable loading VirtualGL libraries when starting virtual

# desktops on Linux.

#

# 1: Enabled. This make OpenGL applications able to use server side

#             graphics hardware.

#

# 0: Disabled. VirtualGL libraries are not loaded.

#

#EnableVirtualGLSupport 0




#

# By default the agent only uses the X11 system fonts, uncomment this

# key to enable use of an X Font Server.

#

#AgentFontServer unix/:7100




#

# Specify the path of default X window system startup script. This

# doesn't apply to Windows and Mac OS X platforms.

#

DefaultXSession "/etc/X11/Xsession default"




#

# Set the default DPI of the X server to the specified value. This

# should normally not be required, but some less recent desktop appli-

# cations fail to set an appropriate value and fall back to 75 DPI,

# which is the default value reported by the X server.

#

#DefaultXDPI 96




#

# Specify path of libraries to be added to the NoMachine agent environ-

# ment. Be sure that NoMachine libraries are listed first.

#

#AgentLibraryPath /lib




#

# Specify a list of comma-separated options to be added to NoMachine

# proxy transport.

#

#ProxyExtraOptions




#

# Append arguments to the command used by the Node to load the display

# server program.

#

# Multiple parameters can be specified by separating them with a blank

# character. For security reasons, no shell interpretation is made.

#

#DisplayServerExtraOptions




#

# Append arguments to the command used by the Node to load the display

# agent connected to the display server.

#

# Multiple parameters can be specified by separating them with a blank

# character. For security reasons, no shell interpretation is made.

#

#DisplayAgentExtraOptions




#

# Specify the screen capture methods to be used for sharing a Wayland

# desktop as a comma-separated list in order of preference. Available

# methods are:

#

# drm:        Copy screen buffers through Direct Rendering Manager.

# compositor: Request screen sharing to the desktop compositor.

# egl:        Use the EGL screen capture method.

#

#WaylandModes drm,compositor,egl




#

# Specify how clients will have to contact the node, by default by

# the NX service. To allow for multiple methods, specify them in a

# comma-separated list. Supported methods are: NX and SSH.

#

ClientConnectionMethods NX,SSH




#

# Specify the location and name of the SSH authorized keys file.

#

#SSHAuthorizedKeys $(HOME)/.ssh/authorized_keys2




#

# Specify the message to be shown to the user when the user starts a

# virtual desktop on this host for the first time.

#

#NodeFirstLoginGreeting "Welcome to your NoMachine session"




#

# Specify the message to be shown to the user every time the user

# starts a new virtual desktop on this host.

#

#NodeLoginGreeting "Welcome to your NoMachine session"




#

# Specify a different path to the default, i.e. user's home, where

# the .nx directory has to be created to store session files. If it

# doesn't exist yet, node will try to create a sub-directory for

# each of the users starting a session there, named as username, and

# will create the .nx under that sub-directory. For example, if this

# key is set to /tmp/nxdir/, when user nxtest runs the first session,

# the node will try to create the /tmp/nxdir/nxtest/.nx directory.

# The directory specifed in the UserNXDirectoryPath key needs to

# have proper ownership and permissions set to ensure that the node,

# running as the user, can access it. I.e. the directory should be

# writeable for all users or alternatively, the administrator should

# create a directory with proper ownership and permissions, named as

# username, for each of the users who need to start sessions there.

#

#UserNXDirectoryPath ""




#

# Specify absolute path of the custom script to be executed before

# the session start-up. The script can accept session ID, username,

# session type and display as its input.

#

# E.g. UserScriptBeforeSessionStart /tmp/nxscript/script.sh

#

#UserScriptBeforeSessionStart ""




#

# Specify absolute path of the custom script to be executed after the

# session start-up. The script can accept session ID, username, ses-

# sion type and display as its input.

#

#UserScriptAfterSessionStart ""




#

# Specify absolute path of the custom script to be executed before

# the session is disconnected. The script can accept session ID, user-

# name, session type and display as its input.

#

#UserScriptBeforeSessionDisconnect ""




#

# Specify absolute path of the custom script to be executed after the

# session is disconnected. The script can accept session ID, username,

# session type and display as its input.

#

#UserScriptAfterSessionDisconnect ""




#

# Specify absolute path of the custom script to be executed before the

# session is closed. The script can accept session ID, username, ses-

# sion type and display its input.

#

#UserScriptBeforeSessionClose ""




#

# Specify absolute path of the custom script to be executed after the

# session is closed. The script can accept session ID, username, ses-

# sion type and display its input.

#

#UserScriptAfterSessionClose ""




#

# Specify absolute path of the custom script to be executed before

# the session is reconnected. The script can accept session ID, user-

# name, session type and display as its input.

#

#UserScriptBeforeSessionReconnect ""




#

# Specify absolute path of the custom script to be executed after the

# session is reconnected. The script can accept session ID, username,

# session type and display as its input.

#

#UserScriptAfterSessionReconnect ""




#

# Specify absolute path of the custom script to be executed after

# session failure. The script can accept session ID, username, ses-

# sion type and display as its input.

#

#UserScriptAfterSessionFailure ""




#

# Specify path and name to the script to be executed before starting

# the virtual desktop or custom session in order to set environment

# variables in the NoMachine session. Use the following template:

# /NX/scripts/env/nxvdvariables.sh to create

# your own script and place it in a directory accessible by the user,

# e.g: VirtualDesktopVariables /opt/nxscripts/nxvdvariables.sh.

#

#VirtualDesktopVariables ""




#

# Specify absolute path of the custom script to be executed after the

# remote screen is resized. The script can accept session ID, user-

# name, session type, display, width and height as its input.

#

#UserScriptAfterRemoteResize ""




#

# Specify how many CPU cores the display server will use to encode

# display updates. The default value 'auto' allows NoMachine to use

# a default number of threads based on the available cores.

#

DisplayServerThreads auto




#

# Specify how many CPU cores the encoder will use to encode display

# updates. The default value 'auto' allows NoMachine to use a default

# number of threads based on the available cores.

#

DisplayEncoderThreads auto




#

# Allow NoMachine to use a specific codec to encode videos or rely on

# its ability to choose the codec depending on network and hardware

# capabilities:

#

# 1: Enabled. Nomachine always uses the specified codec.

#

# 0: Disabled. NoMachine automatically adapts to network conditions

#    and the available hardware.

#

EnableDisplayServerVideoCodec 1




#

# Specify the codec to be used for encoding displays. Accepted

# values are 'vp8','h264'and 'mjpeg'.

#

DisplayServerVideoCodec vp8




#

# Specify the video frame rate for encoding displays. All values

# starting from '1' are accepted. Suggested values are '30', '40'

# '50' and '60'.

#

#DisplayServerVideoFrameRate 30




#

# Allow NoMachine to use a specific frame rate to encode displays or

# rely on its ability to choose automatically a frame rate depending

# on network conditions.

#

# 1: Enabled. Nomachine uses only the specified frame rate.

#

# 0: Disabled. NoMachine automatically chooses a frame rate.

#

#DisplayServerUseVideoFrameRate 0




#

# Enable or disable the debug tool when the node program is launched.

#

# 1: Enabled. The debug tool specified in the CommandDebug key will

#    be run to debug the node program. This can slow down the exe-

#    cution of the node.

#

# 0: Disabled. Debug tool is not run.

#

#EnableDebug 0




#

# Specify absolute path of the command to launch a debug tool.

#

#CommandDebug ""




#

# Specify path and commands of the debug tool in a comma-separated

# list, e.g. accepted command for Valgrind is '/usr/bin/valgrind.bin'.

#

#AcceptedDebuggerCommands /usr/bin/valgrind.bin




#

# Append arguments to the command used by the Node to launch the

# debug tool

#

# Multiple parameters can be specified by separating them with a blank

# character. For security reasons, no shell interpretation is made.

#

#DebugOptions ""




#

# Specify process execution priority for the display server loaded by

# the Node. Accepted values are:

#

# low:      process has niceness 19 on Linux and OS X and idle prio-

#           rity on Windows. This is the least favourable scheduling.

#

# normal:   process has niceness 0 set on Linux and OS X and normal

#           priority class on Windows.

#

# high:     process has niceness -10 set on Linux and OS X and high

#           priority class on Windows.

#

# realtime: process has niceness -20 set on Linux and OS X and real

#           time priority class on Windows. This is the most favourable

#           scheduling.

#

#DisplayServerPriority realtime




#

# Specify process execution priority for the display agent loaded by

# the Node and connected to the display server. Accepted values are:

#

# low:      process has niceness 19 on Linux and OS X and idle prio-

#           rity on Windows. This is the least favourable scheduling.

#

# normal:   process has niceness 0 set on Linux and OS X and normal

#           priority class on Windows.

#

# high:     process has niceness -10 set on Linux and OS X and high

#           priority class on Windows.

#

# realtime: process has niceness -20 set on Linux and OS X and real

#           time priority class on Windows. This is the most favourable

#           scheduling.

#

#DisplayAgentPriority realtime




#

# Enable or disable the server forbidding a file transfer when the

# size of the file to be uploaded exceeds the configured limit.

#

# 1: Enabled. The server doesn't allow to transfer a file when

#    its size exceeds the configured limit.

#

# 0: Disabled. File transfer is always allowed, even when the file

#    is largen than the size limit.

#

#EnableUploadSizeLimit 0




#

# Set the maximum size for files that can be transferred during the

# upload, in bytes. The default value is 104857600 B, 100MB.

#

#UploadSizeLimit 104857600




#

# Enable or disable the server forbidding a file transfer when the

# size of the file to be downloaded exceeds the configured limit.

#

# 1: Enabled. The server doesn't allow to transfer a file when

#    its size exceeds the configured limit.

#

# 0: Disabled. File transfer is always allowed, even when the file

#    is largen than the size limit.

#

#EnableDownloadSizeLimit 0




#

# Set the maximum size for files that can be transferred during the

# download, in bytes. The default value is 104857600 B, 100MB.

#

#DownloadSizeLimit 104857600




#

# Specify path of base directory where the node has to save files

# uploaded to the server. Base directory is "$(DESKTOP)" by default.

# $(HOME) and $(USER) are also accepted values and can be concatenated

# to specify path to a directory, for example "$(HOME)/Shares".

# Target directory must exist on the system.

#

#FileTransferSavePath "$(DESKTOP)"




#

# Enable or disable saving a transferred file to the specified directory.

#

# 1: Enabled. Given the path to be used, the server always save a

#    transferred file to that directory.

#

# 0: Disabled. User is always asked where to save the transferred

#    file.

#

#FileTransferSaveForcePath 0




#

# Enable or disable the ability of recording activities on the local

# desktop:

#

# 1: Enabled. User can create a video of the local desktop and save it

# on their local device.

#

# 0: Disabled. Recording of the local desktop is disabled.

#

#EnableLocalRecording 1




#

# Enable or disable the ability of recording session activities:

#

# 1: Enabled. User can create a video of the session and save it

#    on their local device.

#

# 0: Disabled. Session recording option is disabled.

#

#EnableSessionRecording 1




#

# Enable or disable the whiteboard and chat tool in the Monitor tool.

#

# 1: Enabled. User can run the whiteboard from the Monitor menu.

#

# 0: Disabled. Item 'Show the whiteboard' is not accessible in the

#    monitor menu.

#

#EnableWhiteboard 1




#

# Enable or disable displaying the icon of the Monitor application

# in the system tray.

#

# 1: Enabled. The Monitor icon is visible in the system tray.

#

# 0: Disabled. The Monitor icon is hidden. A notification

#    dialog is issued when users are connecting.

#

#DisplayMonitorIcon 1




#

# Enable or disable displaying the Monitor balloon messages issued to

# notify about events like user's disconnection or user's requests

# for connecting.

#

# 1: Enabled. A balloon message pops-up each time a user disconnects,

#    a connection request arrives or a user disconnects.

#

# 0: Disabled. The Monitor doesn't issue balloon messages to notify

#    about connection or disconnection events.

#

#DisplayMonitorNotifications 1




#

# Enable or disable support for DirectX applications, including games

# running in fullscreen mode.

#

# 1: Enabled. DirectX output is captured and processed.

#

# 0: Disabled. Ignore output of DirectX applications.

#

EnableDirectXSupport 1




#

# Specify the physical display or range of X server displays which are

# made available to NoMachine connections. It is possible to specify a

# single display by display number, e.g. :0, or by port, e.g. 6000.

# Range of displays can be specified as a dash separated list,

# e.g. :0-:7 or, by port number, 6200-6204. By default all displays

# detected as running will be made available for users.

#

#PhysicalDisplays :0




#

# X-Window sessions will only use the X protocol compression. Depend-

# ing on the application, this may require less bandwidth and comput-

# ing resources.

#

# 1: Enabled. Enable X11 vector graphics mode.

#

# 0: Disabled. Disable X11 vector graphics mode.

#

#AgentX11VectorGraphics 1




#

# Enable or disable playing a sound alert when there is an event.

#

# 1: Enabled.  Play a sound when an event occurs, for example

#              when the user connects to the physical desktop.

#              This is the default.

#

# 0: Disabled. Disable acoustic alert.

#

EnableSoundAlert 0




#

# Enable or disable access to the server status interface.

#

# 1: Enabled. Users can access the server status interface and the

#    provided functionalities. The system  will request administrative

#    credentials for the host machine to allow users to display any

#    security sensitive information or change the settings. This is

#    the default.

#

# 0: Disabled. The 'Server status' item will not be accessible in

#    the system tray menu.

#

#EnableServerStatus 1




#

# Enable or disable access to the server preferences.

#

# 1: Enabled. Users can access the server preferences. The system

#    will request administrative credentials for the host machine

#    to allow users to change the settings. This is the default.

#

# 0: Disabled. Users will not have access to the server preferences.

#

#EnableServerPreferences 1




#

# Force legacy X11 keyboard support. Enabling this option the display

# server will build the keyboard map using the X11 keycodes, even when

# evdev Linux input driver is supported. The default is to use evdev

# on node machines where it is available.

#

# 1: Enabled. Always use X11 keycodes even if evdev is supported.

#

# 0: Disabled. Use evdev if supported or fall back to X11 keycodes.

#

#AgentLegacyKeyboard 0




#

# Specify path to libraries to be added to the command for starting

# a new virtual desktop.

#

#DesktopCommandLibraryPath ""




#

# Specify the default console system startup script. This

# doesn't apply to Windows and Mac OS X platforms.

#

DefaultConsole xterm




#

# Enable or disable logging to the system log file, e.g. syslog

# on UNIX based systems and Events log on Windows platforms.

#

# 1: Enabled. The node will log to the system log file.

#

# 0: Disabled. This is the default value, the node will log to

#    the home of the session owner or to the path specified in

#    the CommonLogDirectory key, if enabled.

#

#EnableSyslogSupport 0




#

# Set how often the server has to renew the Kerberos tickets and AFS

# tokens to let users keep their Kerberos credentials inside the

# session. The default value, 600 seconds, makes the server renew

# tickets each 10 minutes. Multiples of 30 are accepted, 30 seconds

# is the minimum value. Value must be lower than the maximum lifetime

# set on the system for Kerberos credentials.

#

#KerberosCredentialsRenewal 600




#

# Enable or disable use of the hardware encoder.

#

# 1: Enabled. Use the hardware encoder if supported by the graphics

#    card.

#

# 0: Disabled. Don't use the hardware encoder.

#

EnableHardwareEncoding 0




#

# Specify the rate control mode for the encoder. Default is 'auto',

# let NoMachine choose automatically the best option. When 'bitrate'

# is set, the encoder will try to give priority to match the target

# bitrate over quality. When 'quality' is set, the encoder will try

# to give priority to match the target quality over bitrate.

#

#EncoderMode auto




#

# Set the DS (Differentiated Services) 8-bit field, previously known

# as ToS (Type of Service), at the IP network layer. Valid values are

# numbers from 0 to 255 in decimal or hexadecimal format (0x00-0xff).

# The six most significant bits should be set to the DSCP values recom-

# mended by RFC-2597 and RFC-2598 (e.g. use 72 or 0x48 for DSCP Class

# AF21). The two least significative bits should be set to 0. It is

# also possible to use the obsolete ToS flags (e.g. 16 or 0x10 for the

# LOWDELAY behaviour).

#

#ProxyPacketPriority 0x48




#

# Enable or disable the server to execute single commands through

# D-Bus. This key applies only to Linux platforms.

#

# 1: Enabled. The node will use dbus-launch to run single commands

#    such as gnome-terminal. This is required on those distributions

#    which rely on dbus-launch for standard X session in order to let

#    users run NoMachine custom sessions.

#

# 0: Disabled. Do not use dbus-launch for executing single commands.

#

EnableDbusLaunch 1




#

# Show or hide the item in the Monitor tool for enabling or disabling

# accepting connections to this physical desktop.

#

# 1: Enabled. The Accepting connection item is shown in the Monitor

#    menu. The desktop owner can switch screen-sharing on/off.

#

# 0: Disabled. The Accepting connection item is not displayed in the

#    Monitor menu.

#

#EnableAcceptingConnection 1




#

# Specify if printers will be visible among all connected users or

# available only for the single user. By default printers are all

# public.

#

# 1: Enabled. User can choose to connect the printer in a public or

#    in a private way. This is the default. If the printer is public,

#    it's accessible to all users running a sessions on this host.

#

# 0: Disabled. Users can connect a printer only in a private way. The

#    printer is accessible to the user who connected it.

#

#EnablePublicPrinter 1




#

# Specify if users can connect their disks publicly or privately or

# only privately.

#

# 1: Enabled. User can choose to connect the disk in a public or

# in a private way. This is the default. When the disk is public,

# it's accessible to all users running a sessions on this host.

# It's mounted in the directory set by DiskSharingPublicBasePath.

#

# 0: Disabled. Users can mount the disk only in a private way. Disks

# are mounted in the directory set by DiskSharingPrivateBasePath

# and are accessible only by the user who connected them.

#

#EnablePublicDiskSharing 1




#

# Specify the absolute path on the server where session recordings

# will be saved, by default %PROGRAMDATA%/NoMachine/var/recording

# on Windows, /Library/Application Support/NoMachine/var/recording

# on macOS and /usr/NX/var/recording/ on Linux.

#

#NXRecordingDirectory /usr/NX/var/recording




#

# Enable or disable EGL screen capture when connecting to a physical

# display on Linux.

#

# 1: Enabled. Use EGL to grab the physical display. This setting is

#    effective only when the desktop environment is Wayland-based.

#

# 0: Disabled. Do not use EGL for screen capture.

#

#EnableEGLCapture 0




#

# Specify path to the directory where NoMachine programs have to log.

# The log directory must be writable by all users who connect by

# NoMachine. By default, nxserver and nxerror log files are stored

# in the .nx directory under the home of session owner. When this key

# is set, they are stored to the given path and in a unique log file.

# Session logs are stored in sub-directories reporting the display

# number and session id of the correspondent session.

#

#CommonLogDirectory ""




#

# Set a fixed value for the resolution of the remote screen in case

# of virtual desktops. Users cannot set a different resolution. Value

# is in pixel, e.g. 1280x800.

#

#FixedResolution ""




#

# Set minimum resolution allowed for the remote screen in case of

# virtual desktops. Value is in pixel, e.g. 800x600.

#

#MinimumResolution ""




#

# Set maximum resolution allowed for the remote screen in case of

# virtual desktops. Value is in pixel, e.g. 1920x1080.

#

#MaximumResolution ""




#

# Enable or disable the automatic logout of the user from the system

# upon disconnection of the NoMachine session.

#

# 1: Enabled. NoMachine will execute the forcelogout.sh script. The

#    automatic logout can be effective only if the command set in

#    script is appropriate for the system.

#

# 0: Disabled. When disconnecting the NoMachine session, the user is

#    not automatically logged out of the system.

#

#LogoutOnDisconnect 0




#

# Delay the execution of the logout command when 'LogoutOnDisconnect'

# is enabled. By default timeout is set to 0, i.e. the forcelogout.sh

# script is executed immediately as soon as the user disconnects the

# session. Specify a delay in seconds, for example 600 to execute the

# logout after ten minutes.

#

#LogoutOnDisconnectTimeout 0